14-30 MHz Magnetic Loop Antenna

The small magnetic loop antenna is a compact efficient antenna that is ideal for portable deployment or for limited spaces and that can be improvised inexpensively.  The antenna is essentially a tuned circuit with an inductor formed by a loop of wire measuring less than 1/4 wavelength and resonated to the operating frequency with a capacitor.  Due to its low radiation resistance and large circulating current, the loop must be constructed of a large outer diameter conductor of low resistance for best efficiency.  Typically these loops are built from coaxial cable, hardline, or copper or aluminum tubing.  These loops have a very narrow bandwidth and require a variable capacitor (and preferably a reduction drive) to be resonated at the operating frequency.  Air variable capacitors or vacuum variable capacitors are used due to the voltage on the order of several thousand volts that is developed across the capacitor.  In order to maintain the lowest possible series resistance, soldered connections and a “butterfly” or split-stator capacitor are preferred. The addition of a fixed capacitor in parallel with the variable capacitor will allow operation of this antenna on 7 or 10 MHz at reduced efficiency by Dr. Carol F. Milazzo, KP4MD


Construction of a Compact and Efficient Portable High Frequency Antenna

Thank you very much for the work done Carol F. Milazzo, KP4MD



Inserisci i tuoi dati qui sotto o clicca su un'icona per effettuare l'accesso:

Logo WordPress.com

Stai commentando usando il tuo account WordPress.com. Chiudi sessione / Modifica )

Foto Twitter

Stai commentando usando il tuo account Twitter. Chiudi sessione / Modifica )

Foto di Facebook

Stai commentando usando il tuo account Facebook. Chiudi sessione / Modifica )

Google+ photo

Stai commentando usando il tuo account Google+. Chiudi sessione / Modifica )

Connessione a %s...